For an extra storage space in the shower, choose Magic Shower Basket. It can hold a variety of items to declutter your shelves, plus it's easy to install.
Magic Shower Basket is an easy solution to keep your shower or bathtub area organized. Works great for holding shampoo and body wash.
Easy push button installation - no tools required
Suction cups designed for a strong hold
Redline Indicator alerts users when to press button to increase suction power
Recommended for: All smooth non-porous surfaces such as ceramic tile, porcelain tile, glass/mirror, and acrylic. Not for use on porous or rough surfaces such as drywall or natural stone.
Clean wall surface where suction cups will be applied. Wipe off suction cups to remove any dust. Allow surfaces to dry completely before applying suction cups to wall.
Position suction cups in desired location.
Press center buttons firmly until the red lines on both buttons are no longer visible. If at any time the red line begins to show again the suction cup is losing suction power. Simply press the button to reseal.
Removal Instructions:
To remove, pull the rubber tab on the suction cups away from the surface.
Cleaning Instructions:
Clean product, with mild soap and water as needed. Do not use bleach or hydrogen peroxide based cleaners
The interior of the basket measures (length x height x depth) 9” x 4.5” x 3.75”
The exterior of the product w/ basket & suction cups measures (length x height x depth) 10” x 7” x 4.6”
How much weight can the basket hold?
The basket can hold up to 8 lbs.
What surfaces will this best stick to?
It is recommended for all smooth, non-porous surfaces such as ceramic tile, porcelain tile, glass and acrylic. Do not use on porous or rough surfaces such as drywall or natural stone.
Can this be easily removed and cleaned?
Yes, the basket comes unhooked from the suction cups and can then be cleaned.
Limpie la superficie donde aplicará las ventosas. Limpie las ventosas para quitarles el polvo. Las superficies deben estar completamente secas antes de aplicar las ventosas en la pared.
Coloque las ventosas en el lugar que desee.
Presione los botones centrales firmemente hasta que las líneas rojas en ambos botones no se vean. Si en algún momento comienzan a aparecer las líneas rojas, las ventosas se estarán aflojando. Simplemente presione el botón para volver a ajustar.
Instrucciones de Remoción:
Para remover, hale las pestañas de goma de las ventosas separándolas de la superficie.
Instrucciones de Limpieza:
Limpie el producto con agua y jabón suave según sea necesario. No use blanqueadores ni limpiadores con peróxido de hidrógeno.
