Tile Grout Coating Pen

Magic Tile Grout Coating Pen renews existing grout with an attractive and durable coating. Use it to cover stains and restore the original look of tiled surfaces. Simple to use, just "draw" a line over existing grout with the pen style applicator.

Recommended for: Grout lines between glazed ceramic or porcelain tiles

Additional Supplies Needed: Grout cleaner, grout or scrub brush, clean rags, paper towel

Directions:

1. Clean grout and allow to dry.
2. Shake tile grout coating pen for 2 minutes with cap on.
3. Remove cap and press tip a few times to get coating to flow.
4. Apply to grout lines. Be careful to avoid getting any coating on tile.
5. If coating gets on tile, wipe off immediately with moist paper towel. After several minutes coating begins to get tacky and more difficult to remove.
6. If flow decreases during use, repeat step 3.
7. Replace cap immediately when not in use.
8. Avoid contact with water for 12 to 24 hours.

Does this product wash off after mopping or cleaning?

No, it does not.

How long does it take to dry?

After use, you should avoid contact with water for 12 to 24 hours.

Suministros adicionales necesarios: Producto limpiador de lechada o para baño, cepillo o escobilla para la lechada, trapos limpios, toallas de papel

Instrucciones:

1. Limpie la lechada y deje secar.
2. Agite el lápiz aplicador de lechada durante 2 minutos, sin quitarle la tapa.
3. Quite la tapa y presione la punta unas veces para que comience a fluir la lechada.
4. Aplique sobre las líneas de lechada. Tenga cuidado de no manchar los azulejos con el producto.
5. Si cae producto sobre el azulejo, limpie inmediatamente con una toalla de papel húmeda. Después de unos minutos, el producto comienza a adherirse y es más difícil removerlo.
6. Si el caudal de flujo disminuye, repita el paso 3.
7. Tape el lápiz de inmediato cuando no lo utilice.
8. Evite el contacto con el agua durante 12 a 24 horas.